starstarstarstarstar_half
This course is an advanced study of bodies in motion as applied to engineering systems and structures. We will study the dynamics of rigid bodies in 3D motion. This will consist of both the kinematics and kinetics of motion. Kinematics deals with the geometrical aspects of motion describing position, velocity, and acceleration, all as a function of time. Kinetics is the study of forces acting on these bodies and how it affects their motion. --------------------------- Recommended Background: To be successful in the course you will need to have mastered basic engineering mechanics concepts and to have successfully completed my course entitled Engineering Systems in Motion: Dynamics of Particles and Bodies in 2D Motion.” We will apply many of the engineering fundamentals learned in those classes and you will need those skills before attempting this course. --------------------------- Suggested Readings: While no specific textbook is required, this course is designed to be compatible with any standard engineering dynamics textbook. You will find a book like this useful as a reference and for completing additional practice problems to enhance your learning of the material. --------------------------- The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license.
    starstarstarstarstar_half
    This course is an introduction to learning and applying the principles required to solve engineering mechanics problems. Concepts will be applied in this course from previous courses you have taken in basic math and physics. The course addresses the modeling and analysis of static equilibrium problems with an emphasis on real world engineering applications and problem solving. The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license.
      starstarstarstarstar_half
      Introduction to Basic Vibrations starts with the fundamental principle of vibrations with a single and double degree of freedom systems. These fundamental vibration systems provide a solid platform not only to understand general vibrations but also to apply or use them into simple mechanical problems.
        starstarstarstarstar_half
        Do you want to know how robots work? Are you interested in robotics as a career? Are you willing to invest the effort to learn fundamental mathematical modeling techniques that are used in all subfields of robotics? If so, then the "Modern Robotics: Mechanics, Planning, and Control" specialization may be for you. This specialization, consisting of six short courses, is serious preparation for serious students who hope to work in the field of robotics or to undertake advanced study. It is not a sampler. In Course 1 of the specialization, Foundations of Robot Motion, you will learn fundamental material regarding robot configurations, for both serial robot mechanisms and robots with closed chains. You will learn about configuration space (C-space), degrees of freedom, C-space topology, implicit and explicit representations of configurations, and holonomic and nonholonomic constraints. You will also learn how to represent spatial velocities and forces as twists and wrenches. This material is at the core of the study of anything that moves (e.g., robots). This course follows the textbook "Modern Robotics: Mechanics, Planning, and Control" (Lynch and Park, Cambridge University Press 2017). You can purchase the book or use the free preprint pdf. You will build on a library of robotics software in the language of your choice (among Python, Mathematica, and MATLAB) and use the free cross-platform robot simulator V-REP, which allows you to work with state-of-the-art robots in the comfort of your own home and with zero financial investment.
          starstarstarstarstar_half
          We explore “10 things” that range from the menu of materials available to engineers in their profession to the many mechanical and electrical properties of materials important to their use in various engineering fields. We also discuss the principles behind the manufacturing of those materials. By the end of the course, you will be able to: * Recognize the important aspects of the materials used in modern engineering applications, * Explain the underlying principle of materials science: “structure leads to properties,” * Identify the role of thermally activated processes in many of these important “things” – as illustrated by the Arrhenius relationship. * Relate each of these topics to issues that have arisen (or potentially could arise) in your life and work. If you would like to explore the topic in more depth you may purchase Dr. Shackelford's Textbook: J.F. Shackelford, Introduction to Materials Science for Engineers, Eighth Edition, Pearson Prentice-Hall, Upper Saddle River, NJ, 2015
            starstarstarstar_half star_border
            This course is perfect for people who want to learn more about the plastic injection process and injection molds and expand their knowledge in an industry in high demand. This course is also essential for those people who have been in the sector for a long time and want to consolidate concepts, discover the why of things or simply remember concepts and see the latest trends in the sector. "Remember that everything in nature when it stagnates begins a decline" Index: Chapter 0: Introduction Chapter 1: Injection Molding Process Introduction Injection  cycle stages Pvt Diagrams Influence of injection parameters Calculation in injection process Deffects in injection molding Chapter 2: Scientific Molding Rheology curve Cavities balance Drop pressure Seal gate process window Chapter 3: Types of injection molds Introduction clasficaction by feeding system Clasification by number of plates in cavity/cores Clasification by number of cavities Special tools Chapter 4: Ejection system Introduction Ejection system componts Ejectors (pin ejector, sleeve ejector, blade ejectors) Undercuts( slider, lifter and hydraulic movements) Design of slider (components, calculations and recomendations) Design of lifters (components, calculations and recomendations) Design of Hydraulics (components, calculations and recomendations) Double ejection systems Cavity ejection system How is acted the ejection system Chapter 5: Cooling system Introduction Calculations: cooling time Calculations: heat transfer, coolant flow and diameter of channels Calculations: cooling channel depth and pitch Cooling channel lay-outs Components in cooling channel Temperatur control unit (TCU) Chapter 6: Injection system Introduction Types of injection system Hot runners Lay-out for moldings Calculations: runner diameters. Chapter 7: Gates Introduction types of gates Calculate shear rate Standard gates and runner shu-off Chapter 8: Venting Introduction Deffects and locations for venting Venting design Chapter 9: Graining Introduction Chemical and laser graining
              starstarstarstarstar_half
              There are opportunities throughout the design process of any product to make significant changes, and ultimately impact the future of manufacturing, by embracing the digital thread. In this course, you will dig into the transformation taking place in how products are designed and manufactured throughout the world. It is the second of two courses that focuses on the "digital thread" – the stream that starts at the creation of a product concept and continues to accumulate information and data throughout the product life cycle. Hear about the realities of implementing the digital thread, directly from someone responsible for making it happen at a company. Learn how the digital thread can fit into product development processes in an office, on a shop floor, and even across an enterprise. Be prepared to talk about the benefits, and limitations, of enacting it. Main concepts of this course will be delivered through lectures, readings, discussions and various videos. This is the third course in the Digital Manufacturing & Design Technology specialization that explores the many facets of manufacturing’s “Fourth Revolution,” aka Industry 4.0, and features a culminating project involving creation of a roadmap to achieve a self-established DMD-related professional goal. To learn more about the Digital Manufacturing and Design Technology specialization, please watch the overview video by copying and pasting the following link into your web browser: https://youtu.be/wETK1O9c-CA
                starstarstarstarstar_half
                Prove to potential employers that you’re up to the task by becoming an Autodesk Certified Professional. This online course from Autodesk prepares you by offering an overview of skills that match what is covered in the Autodesk Certified Professional: AutoCAD for Design and Drafting exam. The video lessons are structured to match the exam’s objective domains and follow the typical workflow and features of the AutoCAD software, including sections on drawing and organizing objects, drawing with accuracy, advanced editing functions, layouts, printing, and outputs, annotation techniques, and reusable content and drawing management. In the course, you will create drawing objects, manage layers, apply object snaps, and work with the User Coordinate System. You’ll edit objects and apply rotation and scale, array techniques, grip editing, offsets, fillet and chamfer, and trim and extend. You will also gain an understanding of exam topics such as layouts and viewports, output formats, and drawing management. Brush up on markup tools, hatch and fill, text, tables, multileaders, dimensioning, and much more. About the Autodesk Certified Professional: AutoCAD for Design and Drafting Exam: The Autodesk Certified Professional: AutoCAD for Design and Drafting exam is the recognized standard for measuring your skills and knowledge in AutoCAD. Certification at this level demonstrates a comprehensive skill set that provides an opportunity for individuals to stand out in a competitive professional environment. This type of experience typically comes from having worked with the software on a regular basis for at least 2 years, equivalent to approximately 400 hours (minimum) - 1200 hours (recommended), of real-world Autodesk software experience. Ready to take the exam? Schedule to take the exam online or find a testing center near you on pearsonvue.com/autodesk.
                  starstarstarstarstar_half
                  This course introduces you to the foundational knowledge in computer-aided design, manufacture, and the practical use of CNC machines. In this course we begin with the basics in Autodesk® Fusion 360™ CAD by learning how to properly sketch and model 3D parts. Before we program any toolpaths, we’ll explore CNC machining basics to ensure we have the ground level foundational knowledge needed to effectively define toolpaths. Finally, we explore the basics of setting up a CAM program and defining toolpaths to cut simple geometry. This is the same basic process that gets repeated for the design and manufacture of any part and is a critical step in learning and understanding the process. Want to take your learning to the next level? Complete the Autodesk CAD/CAM for Manufacturing Specialization, and you’ll unlock an additional Autodesk Credential as further recognition of your success! The Autodesk Credential comes with a digital badge and certificate, which you can add to your resume and share on social media platforms like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can signal to hiring managers that you’ve got the right skills for the job and you’re up on the latest industry trends like generative design. Enroll in the Specialization here: https://www.coursera.org/specializations/autodesk-cad-cam-manufacturing
                    starstarstarstarstar_half
                    How can we create agile micro aerial vehicles that are able to operate autonomously in cluttered indoor and outdoor environments? You will gain an introduction to the mechanics of flight and the design of quadrotor flying robots and will be able to develop dynamic models, derive controllers, and synthesize planners for operating in three dimensional environments. You will be exposed to the challenges of using noisy sensors for localization and maneuvering in complex, three-dimensional environments. Finally, you will gain insights through seeing real world examples of the possible applications and challenges for the rapidly-growing drone industry. Mathematical prerequisites: Students taking this course are expected to have some familiarity with linear algebra, single variable calculus, and differential equations. Programming prerequisites: Some experience programming with MATLAB or Octave is recommended (we will use MATLAB in this course.) MATLAB will require the use of a 64-bit computer.